KaoS Hobbysport 3D Steering lock. for Mi9

This is an essential optional part if you run your Mi9 on a track with hard barrier's. (CRC Click track or similar)

This 3D printed piece bolts to the existing shock mount in the front A arm and acts like a steering stop, preventing the sway bar from bending in a hard crash. 

* The current design will allow up to 27 degrees of steering throw if required, but please use at your own caution. Make sure your steering endpoints are set correctly to not over travel your servo. 

** Stock shock mount must be flipped so the threaded portion is now at the bottom of the arm, place the stopper on top of the flipped shock mount and use a longer screw to secure the stopper to the shock mount. Please note that this screw does not need to be tightened down with force, just tighten it enough to secure the stopper or damage can occur.